Knife Bevel Sharpening Angle
Calculator
Results
- Half-bevel angle (degrees)
- 4.780191
- Full edge angle (degrees)
- 9.560383
Cooking results
| Half-bevel angle (degrees) | 4.780191 |
| Full edge angle (degrees) | 9.560383 |
formula-map diagram
- Half-bevel angle (degrees)
- 4.780191
- Full edge angle (degrees)
- 9.560383
Formula breakdown
Formula
half-bevel angle = asin(edge thickness ÷ (2 × bevel length)); full edge angle = 2 × half-bevel angle= 4.7801918471992
Note
Simplified model: results are standard culinary ratios and stated per-kilogram rates. Real ovens, flours, ingredients and food-safety requirements vary, so use a thermometer and your own judgement.
Example: with the default inputs, calculator.cooking.half_bevel_angle_deg is 4.780191847199159.
More in Cooking and food
See all →Frequently asked questions
How does the calculator find a knife's sharpening angle?+
It takes the edge thickness at the bevel shoulder and the bevel length, both in mm, and computes the half-bevel angle as asin(thickness ÷ (2 × length)).
What is the difference between the half-bevel and full edge angle?+
The half-bevel angle is measured on one side of the edge. The full edge angle is twice that value, covering both sides.
How do I measure the edge thickness and bevel length?+
Measure the thickness of the blade at the top of the bevel and the length of the flat bevel face, in millimetres. The calculator uses whatever values you enter.
Can I check the defaults by hand?+
Yes. With 0.5 mm thickness and a 3 mm bevel, the half angle is asin(0.5 ÷ 6), about 4.8 degrees, and the full angle about 9.6 degrees.
Why must both measurements be above zero?+
Both appear in the formula, and the length is the divisor. Zero values would make the angle meaningless.