Wire Resistance From Resistivity
Calculator

Inputs

Wire resistance (Ω)
0.344

Results

Wire resistance (Ω)
0.344

Electrical results

Wire resistance (Ω)0.344

formula-map diagram

Wire resistance (Ω)
0.344

Electrical relationship

Formula

R = ρ × L / A

= 0.344

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.wire_resistance_ohm is 0.344.

More in Electrical engineering

See all →

Frequently asked questions

How is wire resistance calculated here?+

This calculator uses R = ρ × L / A, with resistivity ρ in Ω·mm²/m, conductor length L in metres and cross-section A in mm². The result is in ohms.

What is the default resistivity?+

The default is 0.0172 Ω·mm²/m, the value the calculator uses for copper at 20 °C. You can replace it with the resistivity of another material.

Does temperature change the result?+

Not by itself. The calculator uses the resistivity value you enter and applies no temperature correction, so enter a resistivity suited to your conditions.

Is the length the cable length or the round-trip length?+

The calculator uses the length exactly as entered. For a two-wire circuit, enter the total conductor length, meaning twice the one-way distance.

Why must the cross-section be above zero?+

The cross-section is the divisor in the formula, so zero would mean division by zero. The calculator keeps it at a tiny positive minimum.