Wind Turbine Power Curve
Calculator

Inputs

Rotor swept area (m²)
28.274333

Results

Rotor swept area (m²)
28.274333
Output power (W)
5,049.937403
Output power (kW)
5.049937

Energy results

Rotor swept area (m²)28.274333
Output power (W)5,049.937403
Output power (kW)5.049937

formula-map diagram

Rotor swept area (m²)
28.274333
Output power (W)
5,049.937403
Output power (kW)
5.049937

Energy relationship

Formula

P = ½ × ρ × A × v³ × Cp, ρ = 1.225 kg/m³

= 28.274333882308

Note

This is a simplified model: it applies the standard equation to the numbers you entered and ignores real-world losses, weather variation, tariff structures and equipment tolerances. Wind power assumes air density 1.225 kg/m³ at ISA sea level and the power coefficient you enter (Betz limit 0.593). Verify with measured data or a professional energy audit before making purchasing decisions.

Example: with the default inputs, calculator.energy.swept_area_m2_2 is 28.274333882308138.

More in Energy and environment

See all →

Frequently asked questions

How is wind turbine power output calculated?+

The calculator uses P = ½ × ρ × A × v³ × Cp, where A is the swept area of the rotor, v is wind speed and Cp is the power coefficient. Air density ρ is fixed at 1.225 kg/m³.

Why does wind speed matter so much?+

Wind speed is cubed in the formula, so doubling the speed multiplies the available power by eight. A small change in wind speed therefore changes the result a lot.

What is the power coefficient Cp?+

It is the fraction of the wind's power the turbine converts, which you enter (the default is 0.4). The calculator applies it as given and does not check it against any limit.

How is the swept area worked out?+

From the rotor diameter, using area = π × (diameter ÷ 2)². With the default 6 m diameter, the swept area is about 28.3 m².

Does this give the real output of a specific turbine?+

No. It is a simple physical estimate with fixed air density and no cut-in, rated or cut-out speeds, losses or terrain effects. Real turbines can differ, so treat the result as an estimate.