Pool Pump Annual Energy Cost
Calculator
Results
- Energy needed (kWh)
- 3,212
- Energy cost
- 481.8
Pool and aquarium results
| Energy needed (kWh) | 3,212 |
| Energy cost | 481.8 |
formula-map diagram
- Energy needed (kWh)
- 3,212
- Energy cost
- 481.8
Pool and aquarium relationship
Formula
cost = power(kW) × hours/day × days × rate= 3212
Note
This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.
Example: with the default inputs, calculator.pool.energy_kwh is 3212.0000000000005.
More in Pool and aquarium
See all →Frequently asked questions
How is the pump energy cost calculated?+
Energy in kWh is pump power (kW) × runtime (hours/day) × number of days. The cost is that energy multiplied by your electricity rate per kWh.
What does the default result represent?+
With 1.1 kW, 8 hours a day, 365 days and a rate of 0.15 per kWh, the energy is 3,212 kWh and the cost is about 481.80, in whatever currency your rate uses.
Can I use it for a period other than a year?+
Yes. The number of days is an input, so you can enter 30 for a month or any other period.
Where do I find the pump power draw?+
You enter it in kW. Use the figure shown for your pump's electrical consumption, for example on its label or manual; the calculator does not look it up.
Does it account for variable-speed pumps or changing rates?+
No. It assumes constant power, constant daily runtime and a single flat rate. The result is an estimate, not a bill.