Pool Filter Turnover Rate
Calculator
Results
- Hours per turnover
- 12
- Required flow rate (L/h)
- 4,166.666666
- Required flow rate (L/min)
- 69.444444
- Required flow rate (US gal/min)
- 18.345281
Pool and aquarium results
| Hours per turnover | 12 |
| Required flow rate (L/h) | 4,166.666666 |
| Required flow rate (L/min) | 69.444444 |
| Required flow rate (US gal/min) | 18.345281 |
formula-map diagram
- Hours per turnover
- 12
- Required flow rate (L/h)
- 4,166.666666
- Required flow rate (L/min)
- 69.444444
- Required flow rate (US gal/min)
- 18.345281
Pool and aquarium relationship
Formula
required flow = volume ÷ (24 ÷ desired turnovers per day)= 12
Note
This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.
Example: with the default inputs, calculator.pool.hours_per_turnover is 12.
More in Pool and aquarium
See all →Frequently asked questions
How do I find the pump flow rate my pool needs?+
Enter the pool volume in litres and the number of turnovers per day you want. The calculator divides the volume by the hours per turnover (24 divided by turnovers per day) to give the required flow.
What does "turnovers per day" mean?+
One turnover is the time needed for a flow equal to the whole pool volume to pass through the filter. With 2 turnovers per day, a full volume circulates every 12 hours.
In what units does the result come?+
The required flow is shown in litres per hour, litres per minute and US gallons per minute (gpm), along with the hours needed for one turnover.
How is this different from a turnover time calculator?+
This one works backwards: you choose the number of turnovers and it returns the flow required. A turnover time calculator starts from a known flow rate and gives the turnover time.
Does the result include pipe losses or pump curves?+
No. It is a simple volume-based estimate and ignores friction, filter resistance and the actual pump curve. Check the pump's real delivered flow, and ask a pool professional for final equipment sizing.