Pond Volume Rectangular
Calculator
Results
- Pond surface area (m²)
- 15
- Water volume (m³)
- 15
- Water volume (L)
- 15,000
Pool and aquarium results
| Pond surface area (m²) | 15 |
| Water volume (m³) | 15 |
| Water volume (L) | 15,000 |
formula-map diagram
- Pond surface area (m²)
- 15
- Water volume (m³)
- 15
- Water volume (L)
- 15,000
Pool and aquarium relationship
Formula
V = L × W × average depth= 15
Note
This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.
Example: with the default inputs, calculator.pool.pond_surface_area_m2 is 15.
More in Pool and aquarium
See all →Frequently asked questions
How do I calculate the volume of a rectangular pond?+
Multiply length × width × average depth: V = L × W × average depth. The result is given in cubic metres and litres.
Why does it ask for average depth?+
Most ponds have shelves and a deeper centre, so a single average depth is used. The calculator treats the pond as a box of that depth.
How accurate is the result?+
It is an estimate. Sloped sides, shelves and rounded corners are not modelled, so the real volume may differ from the box value.
How do I get litres from the result?+
The volume in m³ is multiplied by 1,000, since 1 m³ equals 1,000 L. Both values are shown.
What else does the calculator show?+
It also gives the pond surface area (length × width) in m².