Polymer Clay Shrinkage
Calculator

Inputs

Final dimension (mm)
38.8

Results

Final dimension (mm)
38.8
Shrinkage (mm)
1.2

Craft results

Final dimension (mm)38.8
Shrinkage (mm)1.2

formula-map diagram

Final dimension (mm)
38.8
Shrinkage (mm)
1.2

Formula breakdown

Formula

final = raw × (1 − shrinkage %) — illustrative, brand-specific

= 38.8

Note

Simplified model: these are standard craft estimates based on rectangular layouts, quoted gauge and nominal densities. Real fabric nap, directional prints, shrinkage, pattern matching, yarn lots and supplier SAP values vary, so always make a swatch or test piece and buy a little extra.

Example: with the default inputs, calculator.crafts.final_dimension_mm is 38.8.

More in Crafts and sewing

See all →

Frequently asked questions

How much will my polymer clay piece shrink after baking?+

Enter the raw dimension in mm and the shrinkage percentage. The calculator gives the final size as raw size times (1 minus shrinkage %) and the amount lost in mm.

What shrinkage percentage should I enter?+

The default is 3%, but this is only an illustrative value. Shrinkage depends on the brand and clay, so enter the figure that matches your own tests.

Does it apply to length, width and height?+

The formula is a linear reduction applied to one dimension at a time. Run it once for each dimension you want to check.

Can I work backwards to find the size to sculpt?+

Not directly. The calculator goes from raw size to baked size, so adjust the raw dimension until the final size matches your target.

Is the result guaranteed?+

No, it is an estimate. Baking temperature, time and clay type can change the real shrinkage, so bake a test piece first.