Aquarium Substrate Weight
Calculator
Results
- Volume taken by the substrate (L)
- 24
- Substrate mass (kg)
- 36
Pool and aquarium results
| Volume taken by the substrate (L) | 24 |
| Substrate mass (kg) | 36 |
formula-map diagram
- Volume taken by the substrate (L)
- 24
- Substrate mass (kg)
- 36
Pool and aquarium relationship
Formula
mass = footprint area × depth × bulk density= 24
Note
This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.
Example: with the default inputs, calculator.pool.substrate_volume_l is 24.
More in Pool and aquarium
See all →Frequently asked questions
How much substrate do I need for my aquarium?+
The calculator multiplies the tank footprint (length × width) by the target depth to get the volume in litres, then multiplies by the bulk density to get the mass. With the defaults (1.2 m × 0.4 m, 5 cm, 1.5 kg/L), that is 24 L and 36 kg.
Why do I need to enter a bulk density?+
Different substrate materials weigh different amounts per litre, so the density is an input. The default is 1.5 kg/L; use the value for your own substrate.
Does it give volume as well as weight?+
Yes. It returns the substrate volume in litres and the mass in kilograms.
Does it account for a sloped substrate or decorations?+
No. It assumes an even layer of the target depth across the whole footprint. For a slope, you would need to estimate an average depth yourself.
What units should I use?+
Length and width in metres, depth in centimetres and density in kg per litre. The results come out in litres and kilograms.