Aquarium Nitrate Dilution Change
Calculator

Inputs

Required water-change fraction
0.75

Results

Required water-change fraction
0.75
Required water change (%)
75

Pool and aquarium results

Required water-change fraction0.75
Required water change (%)75

formula-map diagram

Required water-change fraction
0.75
Required water change (%)
75

Pool and aquarium relationship

Formula

fraction = 1 − (safe ppm ÷ current ppm)

= 0.75

Note

This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.

Example: with the default inputs, calculator.pool.required_change_fraction is 0.75.

More in Pool and aquarium

See all →

Frequently asked questions

How much water do I need to change to lower my nitrate?+

Enter the current nitrate and the target level in ppm. The calculator gives the fraction (and percentage) of water to replace, using 1 minus target divided by current.

What assumption does the calculation make about the new water?+

It assumes the replacement water contains zero nitrate. If your tap water has nitrate, the real reduction will be smaller than shown.

Does it matter how big my tank is?+

Not for the percentage, which depends only on the two ppm values. Multiply the percentage by your tank volume yourself to get the amount of water.

Can one water change reach any target?+

The formula gives the fraction for a single change, assuming the water is fully mixed. A very large fraction may be impractical, so you may prefer several smaller changes.

What target nitrate should I enter?+

You choose it; the calculator does not recommend a value. Ideal levels depend on your species and setup, so check with an aquarium specialist. The result is an estimate, not professional advice.