Aquarium Co2 Injection Rate
Calculator
Results
- CO2 mass needed (mg)
- 6,000
- CO2 gas volume needed (mL)
- 3,034.901365
- Bubbles needed per hour
- 60,698.027314
- Bubbles per second
- 16.860563
Pool and aquarium results
| CO2 mass needed (mg) | 6,000 |
| CO2 gas volume needed (mL) | 3,034.901365 |
| Bubbles needed per hour | 60,698.027314 |
| Bubbles per second | 16.860563 |
formula-map diagram
- CO2 mass needed (mg)
- 6,000
- CO2 gas volume needed (mL)
- 3,034.901365
- Bubbles needed per hour
- 60,698.027314
- Bubbles per second
- 16.860563
Pool and aquarium relationship
Formula
CO2(mg) = volume(L) × target ppm; bubbles = CO2 volume(mL) ÷ bubble volume(mL)= 6000
Note
This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.
Example: with the default inputs, calculator.pool.co2_mass_needed_mg is 6000.
More in Pool and aquarium
See all →Frequently asked questions
What does this CO2 calculator compute?+
It converts a target dissolved CO2 level (ppm, mg/L) and your tank volume into a total CO2 mass, then into a gas volume and a number of bubbles. The result is also shown per second.
How is the CO2 volume worked out?+
The mass is tank volume in litres times target ppm, in mg. It is converted to millilitres of gas using a fixed density of 1.977 g/L.
Why do I need the volume of one bubble?+
The bubble count is the gas volume divided by the volume of a single bubble. Bubble size varies with the diffuser and setup, so you enter it yourself (default 0.05 mL).
Is the bubbles-per-second figure a setting I can apply directly?+
Not exactly. The calculator assumes the whole amount is delivered over one hour and does not account for gas lost at the surface, plant uptake or the tank's existing CO2. Use it as a starting estimate.
Is it safe to aim for the target ppm I enter?+
The calculator does not judge safety or recommend a level. Too much CO2 can harm fish, so change settings gradually, watch your livestock and follow the advice of an aquarium specialist.