Veneer Yield Log Scale
Calculator

Inputs

Usable volume (m³)
0.66

Results

Usable volume (m³)
0.66
Veneer area (m²)
1,100
Veneer area (ft²)
11,840.301458

Results

Usable volume (m³)0.66
Veneer area (m²)1,100
Veneer area (ft²)11,840.301458

formula-map diagram

Usable volume (m³)
0.66
Veneer area (m²)
1,100
Veneer area (ft²)
11,840.301458

Formula map

Formula

Area = (log volume × recovery ÷ 100) ÷ veneer thickness

= 0.66

Note

This result is a simplified model; verify against your shop's own tolerances and material data before cutting.

Example: with the default inputs, calculator.woodwork.usable_volume_m3 is 0.66.

More in Woodworking and metalwork

See all →

Frequently asked questions

How is veneer area estimated from a log?+

The calculator multiplies the log volume by the recovery rate to get usable volume, then divides by the veneer thickness. Area = (log volume × recovery ÷ 100) ÷ thickness.

What is the recovery rate?+

It is the percentage of the log volume that ends up as usable veneer. You enter it yourself (default 55%); the calculator does not estimate it from the log's shape or quality.

Why does thinner veneer give more area?+

For the same usable volume, a thinner sheet covers more surface. Area is inversely proportional to thickness, so halving the thickness doubles the area.

What units are used?+

Log volume is in cubic metres, thickness in millimetres. The area is returned in m² and in ft².

Is this a log scale or a guaranteed yield?+

No. It is a volume-based estimate from the numbers you enter. Real output varies with log defects, cutting method and trimming, so it is not a guaranteed yield.