Specific Humidity
Calculator

Inputs

Specific humidity (g/kg)
11.750871

Results

Specific humidity (g/kg)
11.750871
Vapour pressure (hPa)
19.006666

Weather results

Specific humidity (g/kg)11.750871
Vapour pressure (hPa)19.006666

formula-map diagram

Specific humidity (g/kg)
11.750871
Vapour pressure (hPa)
19.006666

Weather relationship

Formula

q = 0.622×e ÷ (p − 0.378×e) (e, p in hPa; result kg/kg × 1000 for g/kg)

= 11.750871762471

Note

This is a simplified model: it applies the published standard formula to the numbers you entered and ignores local terrain, radiation, precipitation type and instrument error. Wind chill is the 2001 NWS/Environment Canada regression, valid at or below 10 °C with wind at or above 4.8 km/h; the heat index is the Rothfusz regression, reliable above about 27 °C; dew point uses the Magnus approximation (a = 17.27, b = 237.7 °C) over liquid water; wet bulb uses Stull's approximation at standard sea-level pressure; pressure and density altitude assume the International Standard Atmosphere and dry air. Do not use these results for aviation, structural or safety decisions without an official forecast or a qualified professional.

Example: with the default inputs, calculator.weather.specific_humidity_g_per_kg is 11.750871762471439.

More in Weather and climate

See all →

Frequently asked questions

What is specific humidity?+

Specific humidity is the mass of water vapour per unit mass of moist air. This calculator returns it in grams per kilogram (g/kg).

How is specific humidity calculated here?+

It uses q = 0.622×e ÷ (p − 0.378×e), where e is the actual vapour pressure and p the atmospheric pressure, both in hPa. The result is multiplied by 1000 to give g/kg.

Which inputs do I need?+

You enter the air temperature in °C, the relative humidity in % and the atmospheric pressure in hPa. The defaults are 25 °C, 60 % and 1013.25 hPa.

How is the vapour pressure obtained?+

Saturation vapour pressure comes from a Tetens-type formula, 0.6108×exp(17.27×T ÷ (T + 237.3)) kPa, converted to hPa. It is then multiplied by the relative humidity to get the actual vapour pressure e, which is also shown.

What is the difference between specific humidity and mixing ratio?+

Specific humidity divides the vapour mass by the total moist air mass, while mixing ratio divides it by the dry air mass only. The two values are very close in ordinary conditions, but the formulas differ slightly.