Sheet Metal Gauge Thickness
Calculator
Results
- Thickness (mm)
- 1.050965
- Thickness (inches)
- 0.041376
Results
| Thickness (mm) | 1.050965 |
| Thickness (inches) | 0.041376 |
formula-map diagram
- Thickness (mm)
- 1.050965
- Thickness (inches)
- 0.041376
Formula map
Formula
t = reference × ratio^gauge (Manufacturers' Standard Gauge form)= 1.0509659170641
Note
This result is a simplified model; verify against your shop's own tolerances and material data before cutting.
Example: with the default inputs, calculator.woodwork.thickness_mm is 1.050965917064058.
More in Woodworking and metalwork
See all →Frequently asked questions
How does this calculator turn a gauge number into a thickness?+
It multiplies a reference thickness at gauge 0 by a step ratio raised to the gauge number: t = reference × ratio^gauge. The defaults are 8.407 mm and 0.890903.
Why does a higher gauge number mean thinner metal?+
Because the ratio between consecutive gauges is below 1 by default, each step up in gauge multiplies the thickness by that ratio and makes it smaller.
Can I use my own reference thickness and step ratio?+
Yes. Both are editable fields, so you can enter the values of the gauge table you work with. The result is only as accurate as the reference and ratio you provide.
What units does the result use?+
The thickness is given in millimetres and in inches, converted at 25.4 mm per inch.
Will this match a printed gauge chart exactly?+
Not necessarily. It evaluates a smooth formula, while printed charts may list rounded or material-specific values. Check the chart for your metal before cutting or ordering.