Serial Dilution Series Volumes
Calculator

Inputs

Total dilution factor
1,000,000

Results

Total dilution factor
1,000,000
log₁₀ total dilution
6
Diluent volume per step (mL)
9

Biology and lab results

Total dilution factor1,000,000
log₁₀ total dilution6
Diluent volume per step (mL)9

formula-map diagram

Total dilution factor
1,000,000
log₁₀ total dilution
6
Diluent volume per step (mL)
9

Formula breakdown

Formula

total DF = (ratio per step)^(number of steps)

= 1000000

Note

Simplified model: these results use standard textbook laboratory relationships and average constants (A260 = 1 for 50 µg/mL dsDNA, 617.96 g/mol per base pair, ~110 Da per amino acid, ideal exponential growth). Real samples vary with purity, contaminants, buffer, temperature and instrument calibration. Always confirm against your own standards and protocol; do not use for diagnostic or safety-critical work.

Example: with the default inputs, calculator.biology.total_dilution_factor is 1000000.

More in Biology and lab

See all →

Frequently asked questions

How is the total dilution factor calculated?+

It is the ratio per step raised to the number of steps. For example, 10 per step over 6 steps gives 10⁶, a 1:1,000,000 total dilution.

What does the log10 result mean?+

It is log₁₀ of the total dilution factor, which for a 1:10 series equals the number of steps. It is handy for labelling tubes as 10⁻¹, 10⁻² and so on.

How much diluent do I add at each step?+

The calculator gives the diluent volume as transferred volume × (ratio − 1). For a 1 mL transfer at 1:10, that is 9 mL of diluent.

What does the volume field represent?+

It is the volume transferred from one tube into the next at each step, in mL. The diluent volume per step is computed from it.

Can I use a ratio other than 10?+

Yes. Enter any ratio of 1 or more, for example 2 for a twofold series. Ratios below 1 are not accepted.