Scaffold Plank Count
Calculator

Inputs

Planks across platform
3

Results

Planks across platform
3
Bay count
5
Total planks
15

Construction results

Planks across platform3
Bay count5
Total planks15

formula-map diagram

Planks across platform
3
Bay count
5
Total planks
15

Formula breakdown

Formula

planks across = ceil(platform width ÷ plank width); total = planks across × ceil(run length ÷ bay length)

= 3

Note

Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.

Example: with the default inputs, calculator.construction.planks_across_platform is 3.

More in Construction and trades

See all →

Frequently asked questions

How many planks do I need for a scaffold platform?+

The calculator counts planks across the platform width, rounded up, then multiplies by the number of bays along the run, also rounded up. Total = ceil(platform width ÷ plank width) × ceil(run length ÷ bay length).

What inputs does it use?+

Platform width (m), plank width (mm), total scaffold run length (m) and plank length per bay (m). The defaults are 0.6 m, 225 mm, 12 m and 2.4 m.

What is a bay in this calculation?+

A bay is one section of the run covered by planks of the length you enter. The bay count is the run length divided by that length, rounded up.

Why are the counts rounded up?+

Planks are whole units, so a partial plank or partial bay still needs a full one. This can slightly overcount if the dimensions only just exceed a whole number.

Does it confirm the scaffold is safe or compliant?+

No. It only counts planks from the dimensions you enter. Plank grade, load rating, gaps, guardrails and regulations are not checked, so follow your scaffold supplier's and local safety rules.