Sawblade Tooth Set Kerf
Calculator

Inputs

Kerf width (mm)
2.8

Results

Kerf width (mm)
2.8
Total set (mm)
0.6
Kerf width (inches)
0.110236

Results

Kerf width (mm)2.8
Total set (mm)0.6
Kerf width (inches)0.110236

formula-map diagram

Kerf width (mm)
2.8
Total set (mm)
0.6
Kerf width (inches)
0.110236

Formula map

Formula

Kerf = blade plate thickness + 2 × set per side

= 2.8

Note

This result is a simplified model; verify against your shop's own tolerances and material data before cutting.

Example: with the default inputs, calculator.woodwork.kerf_width_mm is 2.8000000000000003.

More in Woodworking and metalwork

See all →

Frequently asked questions

How is the kerf of a saw blade calculated?+

The calculator adds the blade plate thickness to twice the tooth set per side: kerf = plate thickness + 2 × set. The result is shown in millimetres and inches.

What is tooth set?+

Tooth set is how far the teeth are bent outward from the blade plate on each side, entered here in millimetres. The calculator assumes the same set on both sides.

What is the difference between plate thickness and kerf?+

Plate thickness is the thickness of the steel body of the blade, while the kerf is the width of the cut it makes. With set teeth the kerf is wider than the plate, by the total set (2 × set per side).

What other results does it give?+

Besides the kerf width in mm and inches, it returns the total set, which is 2 × set per side. With the defaults (2.2 mm plate, 0.3 mm set) the kerf is 2.8 mm.

Is this the real kerf of my blade?+

It is a calculation from the two values you enter. A real cut can differ with blade wear, sharpening, tooth shape and the material, so measure a test cut if the exact width matters.