Sawblade Chip Load Feedrate
Calculator

Inputs

Feed rate (mm/min)
9,600

Results

Feed rate (mm/min)
9,600
Feed rate (m/min)
9.6
Teeth per minute
96,000

Results

Feed rate (mm/min)9,600
Feed rate (m/min)9.6
Teeth per minute96,000

formula-map diagram

Feed rate (mm/min)
9,600
Feed rate (m/min)
9.6
Teeth per minute
96,000

Formula map

Formula

Feed rate = RPM × teeth × chip load per tooth

= 9600

Note

This result is a simplified model; verify against your shop's own tolerances and material data before cutting.

Example: with the default inputs, calculator.woodwork.feed_rate_mm_min is 9600.

More in Woodworking and metalwork

See all →

Frequently asked questions

How do I calculate feed rate from chip load?+

Multiply spindle speed in RPM by the number of teeth and by the chip load per tooth in mm. With the defaults, 4000 × 24 × 0.1 gives 9,600 mm/min.

What is chip load?+

In this calculator it is the thickness of material each tooth removes per revolution, entered in mm. You choose the value; the calculator does not suggest one.

What results does it show?+

The feed rate in mm per minute, the same rate in metres per minute, and teeth per minute, which is RPM × tooth count.

Which chip load should I use for my material?+

The calculator does not supply a recommended chip load for any material. Take the value from your blade or tool manufacturer and enter it.

Is the result a safe feed speed?+

It is only the arithmetic result of the three numbers you enter. It does not check machine power, blade type or safety, so follow the manufacturer's guidance and test carefully.