Retaining Wall Volume
Calculator
Results
- Average wall width (m)
- 0.449999
- Retaining wall volume (m³)
- 8.1
Construction results
| Average wall width (m) | 0.449999 |
| Retaining wall volume (m³) | 8.1 |
formula-map diagram
- Average wall width (m)
- 0.449999
- Retaining wall volume (m³)
- 8.1
Formula breakdown
Formula
V = ((top width + base width) ÷ 2) × H × L= 0.45
Note
Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.
Example: with the default inputs, calculator.construction.average_wall_width_m is 0.44999999999999996.
More in Construction and trades
See all →Frequently asked questions
How do I calculate the volume of a retaining wall?+
The wall is treated as a trapezoidal cross-section: V = ((top width + base width) ÷ 2) × height × length. Enter all four dimensions in metres and the result is in cubic metres.
Why does it use an average of the top and base widths?+
Many retaining walls are thicker at the base than at the top. Averaging the two widths gives the area of the trapezoidal cross-section, which is then multiplied by the wall length.
What are the default values?+
The defaults are 0.3 m at the top, 0.6 m at the base, 1.5 m high and 12 m long. The calculator also shows the average wall width.
Can I use it for a wall of constant thickness?+
Yes. Enter the same value for the top and base widths and the formula reduces to width × height × length.
Does it cover footings, backfill or wall stability?+
No. It computes only the volume of the wall body from the dimensions you enter. Footings, drainage, backfill and structural stability are not included, so involve an engineer for walls that retain soil.