Rc Lowpass Cutoff Frequency
Calculator

Inputs

Cutoff frequency (Hz)
159.154943

Results

Cutoff frequency (Hz)
159.154943
Cutoff angular frequency (rad/s)
1,000

Electrical results

Cutoff frequency (Hz)159.154943
Cutoff angular frequency (rad/s)1,000

formula-map diagram

Cutoff frequency (Hz)
159.154943
Cutoff angular frequency (rad/s)
1,000

Electrical relationship

Formula

fc = 1 / (2π × R × C)

= 159.1549430919

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.cutoff_frequency_hz is 159.15494309189535.

More in Electrical engineering

See all →

Frequently asked questions

How do I find the cutoff frequency of an RC low-pass filter?+

Enter the resistance in ohms and the capacitance in microfarads. The calculator computes fc = 1 / (2π × R × C).

What does the cutoff frequency represent?+

It is the -3 dB frequency of the first-order RC low-pass filter, the point where the formula fc = 1 / (2πRC) places the corner of the response.

Why is the capacitance entered in microfarads?+

The field is in µF for convenience, and the calculator converts it to farads (dividing by 1,000,000) before applying the formula.

What is the angular cutoff frequency shown in the results?+

It is ω = 1 / (R × C) in radians per second, which equals 2π times the cutoff frequency in hertz.

What happens if I increase the resistance or the capacitance?+

The cutoff frequency falls in inverse proportion: doubling R or C halves fc. Both inputs must be greater than zero.