Propeller Theoretical Pitch Speed
Calculator
Results
- Theoretical pitch speed (mph)
- 165.719696
- Theoretical pitch speed (knots)
- 144.00641
Aviation and marine results
| Theoretical pitch speed (mph) | 165.719696 |
| Theoretical pitch speed (knots) | 144.00641 |
formula-map diagram
- Theoretical pitch speed (mph)
- 165.719696
- Theoretical pitch speed (knots)
- 144.00641
Aviation and marine relationship
Formula
Theoretical pitch speed = pitch × RPM= 165.7196969697
Note
This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.
Example: with the default inputs, calculator.aviation.pitch_speed_mph is 165.71969696969697.
More in Aviation and marine
See all →Frequently asked questions
What is theoretical propeller pitch speed?+
It is how fast the boat or aircraft would move if the propeller advanced exactly one pitch per revolution with no slip. The calculator computes it as pitch × RPM.
How is pitch speed calculated here?+
Pitch in inches times RPM gives inches per minute, which is converted to miles per hour. Knots are then obtained by dividing mph by 1.15078.
What inputs do I need?+
The propeller pitch in inches and the propeller RPM. Results come out in miles per hour and knots.
Why is my real speed lower than the pitch speed?+
Real propellers slip through the water or air, so actual speed is below the theoretical figure. This calculator does not model slip; use the propeller slip calculator to compare a measured speed with it.
Is the result a prediction of my top speed?+
No. It is only the no-slip theoretical value from pitch and RPM, and ignores drag, load and slip. Treat it as an estimate.