Paver Count Patio
Calculator
Results
- Paver area (m²)
- 0.02
- Pavers needed (exact)
- 1,099.999999
- Pavers to buy
- 1,100
Construction results
| Paver area (m²) | 0.02 |
| Pavers needed (exact) | 1,099.999999 |
| Pavers to buy | 1,100 |
formula-map diagram
- Paver area (m²)
- 0.02
- Pavers needed (exact)
- 1,099.999999
- Pavers to buy
- 1,100
Formula breakdown
Formula
pavers = area ÷ paver area × (1 + waste ÷ 100)= 0.02
Note
Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.
Example: with the default inputs, calculator.construction.paver_area_m2 is 0.020000000000000004.
More in Construction and trades
See all →Frequently asked questions
How many pavers do I need for my patio?+
Enter the patio area and the length and width of one paver. The calculator divides the area by the area of one paver, then adds your waste allowance.
Why does the calculator add a waste percentage?+
Pavers get cut at edges and corners, and some break. The waste allowance (10% by default) multiplies the exact count so you order a little extra.
What units should I use for the paver size?+
Paver length and width are in millimetres, and the patio area is in square metres. The calculator converts the paver size to metres internally.
What is the difference between exact and pavers to buy?+
The exact figure is the unrounded result, including waste. The number to buy is that figure rounded up to the next whole paver.
Does this include joint gaps or the base layer?+
No. It uses the paver dimensions you enter and only the area divided by one paver's area. If you lay pavers with joints, include the joint in the paver length and width. Base material is not calculated.