Mortise Tenon Thickness Rule
Calculator
Results
- Tenon thickness (mm)
- 6.3327
- Shoulder thickness (mm)
- 6.33365
- Mortise width (mm)
- 6.3327
Results
| Tenon thickness (mm) | 6.3327 |
| Shoulder thickness (mm) | 6.33365 |
| Mortise width (mm) | 6.3327 |
formula-map diagram
- Tenon thickness (mm)
- 6.3327
- Shoulder thickness (mm)
- 6.33365
- Mortise width (mm)
- 6.3327
Formula map
Formula
Tenon thickness = stock thickness × 1/3 (standard rule)= 6.3327
Note
This result is a simplified model; verify against your shop's own tolerances and material data before cutting.
Example: with the default inputs, calculator.woodwork.tenon_thickness_mm is 6.3327.
More in Woodworking and metalwork
See all →Frequently asked questions
How thick should a tenon be?+
The calculator multiplies the stock thickness by a fraction you set, defaulting to 0.3333 (one third). For 19 mm stock that gives a tenon of about 6.33 mm.
What is the shoulder thickness in the results?+
It is (stock thickness − tenon thickness) ÷ 2, the material left on each side of the tenon. With the defaults it is about 6.33 mm per side.
How wide should the mortise be?+
The calculator sets the mortise width equal to the tenon thickness. Any fitting clearance is up to you.
Can I use a fraction other than one third?+
Yes. Change the fraction field, for example to 0.4. The tenon, shoulder and mortise values update from whatever fraction you enter.
Is one third a guaranteed safe proportion?+
The calculator applies the fraction you choose and nothing more. It does not check wood species, load or joint strength, so treat the result as a layout starting point.