Max Power Transfer
Calculator

Inputs

Maximum power transfer (W)
0.72

Results

Maximum power transfer (W)
0.72
Matched load resistance (Ω)
50

Electrical results

Maximum power transfer (W)0.72
Matched load resistance (Ω)50

formula-map diagram

Maximum power transfer (W)
0.72
Matched load resistance (Ω)
50

Electrical relationship

Formula

Pmax = Vth² / (4 × Rs), when RL = Rs

= 0.72

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.max_power_w is 0.72.

More in Electrical engineering

See all →

Frequently asked questions

What does the maximum power transfer theorem say?+

Power delivered to a load is highest when the load resistance equals the source resistance. This calculator then gives Pmax = Vth² / (4 × Rs).

What inputs does the calculator need?+

It needs the Thevenin voltage of the source in volts and its source resistance in ohms. Source resistance must be above zero.

What is the matched load resistance in the result?+

It is the load resistance at which power transfer peaks, equal to the source resistance you entered (RL = Rs).

Is maximum power transfer the same as maximum efficiency?+

No. This calculator only computes the maximum power value. It does not compute efficiency, so do not assume a matched load is the best choice for every design.

Does it work for AC circuits?+

The formula here uses resistances and a voltage only, with no reactance or phase. It matches a purely resistive source and load.