Mach Number From True Airspeed
Calculator

Inputs

Mach number
0.756169

Results

Mach number
0.756169
Speed of sound (knots)
595.105008
True airspeed (m/s)
231.5

Aviation and marine results

Mach number0.756169
Speed of sound (knots)595.105008
True airspeed (m/s)231.5

formula-map diagram

Mach number
0.756169
Speed of sound (knots)
595.105008
True airspeed (m/s)
231.5

Aviation and marine relationship

Formula

M = TAS ÷ a, a = 20.05 × √(T + 273.15) m/s

= 0.75616906877967

Note

This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.

Example: with the default inputs, calculator.aviation.mach_number is 0.7561690687796679.

More in Aviation and marine

See all →

Frequently asked questions

How do I convert true airspeed to Mach number?+

Mach number is your true airspeed divided by the local speed of sound. This calculator converts the TAS from knots to metres per second, then divides by the speed of sound at your outside air temperature.

How is the speed of sound calculated here?+

It uses a = 20.05 × √(T + 273.15) metres per second, where T is the outside air temperature in °C. The result is also shown in knots.

Why does the temperature change the Mach number?+

The speed of sound depends on air temperature. At the same true airspeed, colder air gives a lower speed of sound and therefore a higher Mach number.

Which speed should I enter, true or indicated airspeed?+

Enter true airspeed (TAS) in knots. Indicated or calibrated airspeed is not converted by this calculator.

Can I use this for flight planning or operations?+

It is an estimate based on a simple formula and the temperature you enter. Always rely on your aircraft instruments, flight manual and official procedures.