Linear Thermal Expansion
Calculator

Inputs

Length change (m)
0.0048

Results

Length change (m)
0.0048
Final length
10.0048

Physics results

Length change (m)0.0048
Final length10.0048

formula-map diagram

Length change (m)
0.0048
Final length
10.0048

Physical relationship

Formula

ΔL = L₀ × α × ΔT

= 0.0048

Note

This result applies an idealized textbook equation to the numbers you entered; it ignores air resistance, material tolerances and other real-world losses.

Example: with the default inputs, calculator.physics.length_change_m is 0.0048000000000000004.

More in Physics and engineering

See all →

Frequently asked questions

How do you calculate linear thermal expansion?+

This calculator uses ΔL = L₀ × α × ΔT, where L₀ is the initial length, α the coefficient of linear expansion and ΔT the temperature change. It also shows the final length, L₀ + ΔL.

What unit should the expansion coefficient be in?+

Enter α in 1/K, for example 0.000012 for 12 × 10⁻⁶ per kelvin. A temperature change of 1 °C equals 1 K, so you can enter the difference in either unit.

Can I enter a negative temperature change?+

Yes. A negative ΔT, meaning cooling, gives a negative length change, so the object contracts. The calculator accepts a change down to -273.15 K.

Does the calculator provide the coefficient for my material?+

No, you must supply α yourself, and the default value is only an example. Look up the coefficient for your specific material, since it varies from one material to another.

Is this valid for large temperature ranges?+

The formula assumes α is constant, which is a good approximation for modest temperature changes. Over very wide ranges the real coefficient can vary, so treat the result as an estimate.