Light Stop Difference
Calculator

Inputs

Stop difference
2

Results

Stop difference
2

Media and photography results

Stop difference2

formula-map diagram

Stop difference
2

Media and photography relationship

Formula

stops = log₂(E₁ ÷ E₂)

= 2

Note

This result uses the values you entered and a simplified planning equation; verify quantities and local requirements before purchasing or building.

Example: with the default inputs, calculator.media_photo.stop_difference is 2.

More in Media and photography

See all →

Frequently asked questions

How do I calculate the difference in stops between two light levels?+

Divide the first illuminance by the second and take the base-2 logarithm: stops = log₂(E₁ ÷ E₂). Each stop is a doubling or halving of light.

What do the default values give?+

400 against 100 is a ratio of 4, which equals 2 stops. The first light level is two stops brighter than the second.

What does a negative result mean?+

A negative number means the first illuminance is lower than the second. For example, 100 against 400 gives −2 stops.

Which units should I use for illuminance?+

Any unit works as long as both values use the same one, such as lux, because only the ratio matters. The calculator does not convert between units.

Can I use it for readings from a light meter?+

Yes, you can enter two measured values and see how many stops apart they are. The result is only as accurate as the readings you type in, so treat it as an estimate.