Inverse Square Falloff
Calculator
Results
- Illuminance at distance
- 11.111111
Media and photography results
| Illuminance at distance | 11.111111 |
formula-map diagram
- Illuminance at distance
- 11.111111
Media and photography relationship
Formula
E₂ = E₁ × (d₁ ÷ d₂)²= 11.111111111111
Note
This result uses the values you entered and a simplified planning equation; verify quantities and local requirements before purchasing or building.
Example: with the default inputs, calculator.media_photo.illuminance_at_distance is 11.11111111111111.
More in Media and photography
See all →Frequently asked questions
What is the inverse square law for light?+
It says that light intensity from a point source falls with the square of the distance. Doubling the distance leaves a quarter of the illuminance.
How does this calculator compute the illuminance at a new distance?+
It uses E₂ = E₁ × (d₁ ÷ d₂)². With 100 at 1 m, the value at 3 m is about 11.1.
What unit should I use for illuminance?+
Any unit works, such as lux, because the result is in the same unit as the value you enter. Distances must both be in metres.
Why does moving a light closer change the exposure so much?+
Because the effect is squared, halving the distance multiplies the illuminance by four. That is why small changes in flash or lamp placement are so visible.
Does the law always hold in real scenes?+
Only approximately. It assumes a point source in open space, so large softboxes, reflective walls and nearby surfaces make real falloff different.