Header Beam Load
Calculator
Results
- Reaction at each support (kN)
- 6
- Maximum bending moment (kN·m)
- 9
Construction results
| Reaction at each support (kN) | 6 |
| Maximum bending moment (kN·m) | 9 |
formula-map diagram
- Reaction at each support (kN)
- 6
- Maximum bending moment (kN·m)
- 9
Formula breakdown
Formula
R = P ÷ 2; M_max = P × L ÷ 4= 6
Note
Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.
Example: with the default inputs, calculator.construction.reaction_each_end_kn is 6.
More in Construction and trades
See all →Frequently asked questions
How do I calculate the load on a header beam?+
Enter the clear span in metres and a single point load at midspan in kilonewtons. The calculator gives the reaction at each end and the maximum bending moment.
What formula does the header beam calculator use?+
It models a simply supported beam with one point load at midspan: reaction at each end R = P ÷ 2 and maximum moment M = P × L ÷ 4.
Why is the reaction at each end half the load?+
With the load at midspan the beam is symmetric, so each support carries half of it. Only the point load is counted, not the beam's own weight.
Does this size the header or check its strength?+
No. It returns reactions in kN and a moment in kN·m, but it does not check material, section size or deflection. It is an estimate, not engineering advice; have a qualified engineer confirm any structural member.
What cases does it not cover?+
Uniformly distributed loads, off-centre point loads, multiple loads and continuous or fixed-end beams are not modelled. The span and load must be greater than zero.