Footing Volume
Calculator

Inputs

Footing volume (m³)
2

Results

Footing volume (m³)
2
Footing volume with waste (m³)
2.1

Construction results

Footing volume (m³)2
Footing volume with waste (m³)2.1

formula-map diagram

Footing volume (m³)
2
Footing volume with waste (m³)
2.1

Formula breakdown

Formula

V = L × W × D, then V × (1 + waste ÷ 100)

= 2

Note

Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.

Example: with the default inputs, calculator.construction.footing_volume_m3 is 2.

More in Construction and trades

See all →

Frequently asked questions

How do I calculate the concrete volume of a strip footing?+

Multiply the footing length by its width and its depth, all in metres. The calculator returns the result in cubic metres (V = L × W × D).

What inputs does the footing volume calculator need?+

Footing length (m), width (m), depth (m) and a waste allowance in percent. The defaults are 10 m, 0.5 m, 0.4 m and 5 %.

Does the result include extra concrete for waste?+

Yes. It shows the exact volume and a second figure with your waste allowance added, calculated as V × (1 + waste ÷ 100).

Can I use it for a footing with a varying cross-section?+

No. It assumes a simple rectangular footing with a constant width and depth along its whole length. For stepped or tapered shapes, calculate each section separately.

Is the volume enough to order concrete?+

It is an estimate based on the dimensions you enter. Over-excavation, uneven ground and local ordering rules are not modelled, so check the quantity with your supplier or an engineer.