Environmental Lapse Rate
Calculator
Results
- Lapse rate (°C per km)
- 5
- Lapse rate (°C per 100 m)
- 0.5
Weather results
| Lapse rate (°C per km) | 5 |
| Lapse rate (°C per 100 m) | 0.5 |
formula-map diagram
- Lapse rate (°C per km)
- 5
- Lapse rate (°C per 100 m)
- 0.5
Weather relationship
Formula
Γ = (T1 − T2) ÷ (h2 − h1) (environmental lapse rate; ISA standard ≈ 6.5 °C/km)= 5
Note
This is a simplified model: it applies the published standard formula to the numbers you entered and ignores local terrain, radiation, precipitation type and instrument error. Wind chill is the 2001 NWS/Environment Canada regression, valid at or below 10 °C with wind at or above 4.8 km/h; the heat index is the Rothfusz regression, reliable above about 27 °C; dew point uses the Magnus approximation (a = 17.27, b = 237.7 °C) over liquid water; wet bulb uses Stull's approximation at standard sea-level pressure; pressure and density altitude assume the International Standard Atmosphere and dry air. Do not use these results for aviation, structural or safety decisions without an official forecast or a qualified professional.
Example: with the default inputs, calculator.weather.lapse_rate_c_per_km is 5.
More in Weather and climate
See all →Frequently asked questions
What is the environmental lapse rate?+
It is the rate at which the measured air temperature falls with altitude between two points. This calculator gives it in °C per kilometre and in °C per 100 m.
How is the lapse rate calculated?+
It uses Γ = (T1 − T2) ÷ (h2 − h1), with temperatures in °C and altitudes in metres. A positive value means the temperature drops as you go up.
Which inputs do I need?+
You enter the temperature and altitude at two points. The defaults are 15 °C at 0 m and 5 °C at 2000 m.
What happens if both altitudes are the same?+
The altitude difference would be zero, so the calculator substitutes a tiny value to avoid dividing by zero. The resulting lapse rate is then not meaningful, so use two different altitudes.
What does a negative result mean?+
A negative lapse rate means the temperature rises with height between your two points, which is an inversion. The sign follows the formula, with point 1 as the reference.