Edge Banding Length Panels
Calculator

Inputs

Total length (mm)
7,200

Results

Total length (mm)
7,200
Total length with allowance (mm)
7,776
Total length with allowance (m)
7.776

Results

Total length (mm)7,200
Total length with allowance (mm)7,776
Total length with allowance (m)7.776

formula-map diagram

Total length (mm)
7,200
Total length with allowance (mm)
7,776
Total length with allowance (m)
7.776

Formula map

Formula

L = edge count × average edge length × (1 + allowance ÷ 100)

= 7200

Note

This result is a simplified model; verify against your shop's own tolerances and material data before cutting.

Example: with the default inputs, calculator.woodwork.total_length_mm is 7200.

More in Woodworking and metalwork

See all →

Frequently asked questions

How is the total edge banding length calculated?+

The calculator multiplies the number of edges by the average edge length, then adds the offcut allowance: L = count × length × (1 + allowance ÷ 100).

What is the offcut allowance for?+

It adds a percentage on top of the raw length to cover trimming and cutting waste. The default is 8%, and you can change it to suit your own waste.

What units are the results in?+

Edge length is entered in millimetres. Results are given as total length in mm, length with allowance in mm and length with allowance in metres.

Do I need to enter every edge separately?+

No. Enter the number of edges and their average length. If edges differ a lot, the average still works as long as it reflects the total length you will band.

Does it work out the number of rolls or the cost?+

No. It gives only the length needed. Roll size and price are not part of the calculation.