Dovetail Angle Ratio
Calculator

Inputs

Dovetail angle (degrees)
9.462322

Results

Dovetail angle (degrees)
9.462322
Slope per 100 mm
16.666666
Complement angle (degrees)
80.537677

Results

Dovetail angle (degrees)9.462322
Slope per 100 mm16.666666
Complement angle (degrees)80.537677

formula-map diagram

Dovetail angle (degrees)
9.462322
Slope per 100 mm
16.666666
Complement angle (degrees)
80.537677

Formula map

Formula

θ = atan(1 ÷ n) for a 1 : n dovetail slope

= 9.4623222080256

Note

This result is a simplified model; verify against your shop's own tolerances and material data before cutting.

Example: with the default inputs, calculator.woodwork.dovetail_angle_degrees is 9.462322208025617.

More in Woodworking and metalwork

See all →

Frequently asked questions

How do I convert a dovetail slope ratio to an angle?+

Enter n for a 1 : n slope. The angle is atan(1 ÷ n), so the default 1 : 6 gives about 9.46 degrees.

What does the slope ratio 1 : n mean here?+

It means the side of the dovetail moves 1 unit sideways for every n units along its length. A larger n gives a shallower, flatter angle.

What are the other results?+

Besides the angle, the calculator gives the slope per 100 mm, which is 100 ÷ n, and the complement angle, which is 90 minus the angle.

Is the angle measured from the board's edge or face?+

The formula is the angle whose tangent is 1 ÷ n, measured from the line of the slope's length. Check which reference line your marking gauge or template uses before transferring it.

Does it recommend a ratio for hardwood or softwood?+

No. It only converts the ratio you enter into an angle. Choosing the ratio is up to you.