Die Cut Safe Margin
Calculator
Results
- Required safe margin (mm)
- 1.5
- Required safe margin (inches)
- 0.059055
Design and print results
| Required safe margin (mm) | 1.5 |
| Required safe margin (inches) | 0.059055 |
formula-map diagram
- Required safe margin (mm)
- 1.5
- Required safe margin (inches)
- 0.059055
Formula breakdown
Formula
required margin = die tolerance + registration tolerance= 1.5
Note
Simplified model: these are standard prepress and typographic relationships computed on nominal values. Real press bulk, paper caliper and shrinkage, ink limits for a given profile, font metrics and binding allowances vary by supplier and by job, so confirm with your printer and a proof before going to press.
Example: with the default inputs, calculator.design.required_safe_margin_mm is 1.5.
More in Design and printing
See all →Frequently asked questions
How is the die-cut safe margin calculated?+
It is the die tolerance plus the registration tolerance, both in millimetres. With the defaults (1 mm and 0.5 mm) the required margin is 1.5 mm, also shown in inches.
What is the die tolerance field?+
It is the shift you allow for the cutting die itself. Enter the value your printer or die maker gives you; the calculator simply adds it to the registration tolerance.
What is the registration tolerance field?+
It is the allowed misalignment between the printed artwork and the cut line. It is added to the die tolerance to get the total clearance.
What does the result mean for my layout?+
Keep text, logos and key elements at least that far inside the cut line. The calculator works from the two tolerances you type, so the margin is only as good as those inputs.
Does it give the margin in other units?+
Yes, it returns the required margin in millimetres and in inches (millimetres divided by 25.4). Both tolerances must be greater than zero.