Delta To Star Conversion
Calculator

Inputs

Star resistance R1 (Ω)
14.857142

Results

Star resistance R1 (Ω)
14.857142
Star resistance R2 (Ω)
19.964285
Star resistance R3 (Ω)
9.828571

Electrical results

Star resistance R1 (Ω)14.857142
Star resistance R2 (Ω)19.964285
Star resistance R3 (Ω)9.828571

formula-map diagram

Star resistance R1 (Ω)
14.857142
Star resistance R2 (Ω)
19.964285
Star resistance R3 (Ω)
9.828571

Electrical relationship

Formula

R1 = Rb×Rc/(Ra+Rb+Rc) ; R2 = Ra×Rc/(...) ; R3 = Ra×Rb/(...)

= 14.857142857143

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.star_r1_ohm is 14.857142857142858.

More in Electrical engineering

See all →

Frequently asked questions

What does the delta to star conversion compute?+

Given the three delta (Δ) resistances Ra, Rb and Rc, it returns the equivalent star (Y) resistances R1, R2 and R3, in ohms.

What formula does it use?+

With the sum Ra + Rb + Rc, it computes R1 = Rb × Rc / sum, R2 = Ra × Rc / sum and R3 = Ra × Rb / sum.

Which delta resistors feed each star resistor?+

R1 uses Rb and Rc, R2 uses Ra and Rc, and R3 uses Ra and Rb. Check that your own labelling of the corners matches this convention before using the values.

What if all three delta resistances are zero?+

The sum would be zero, so the calculator substitutes a tiny positive value to avoid a division by zero. The result is then not meaningful, so enter real resistances.

Is this the reverse of the star to delta calculator?+

Yes, it performs the inverse conversion: feeding it the delta values returned by the star to delta calculator gives back the original star resistances.