Cut Fill Average End Area
Calculator
Results
- Earthwork volume (m³)
- 130
Construction results
| Earthwork volume (m³) | 130 |
formula-map diagram
- Earthwork volume (m³)
- 130
Formula breakdown
Formula
V = ((A₁ + A₂) ÷ 2) × L= 130
Note
Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.
Example: with the default inputs, calculator.construction.earthwork_volume_m3 is 130.
More in Construction and trades
See all →Frequently asked questions
What is the average end area method?+
It estimates earthwork volume by averaging the cross-section areas at two ends and multiplying by the distance between them: V = ((A₁ + A₂) ÷ 2) × L.
What do I enter for the start and end areas?+
Enter the cross-section area at each station in square metres, plus the distance between the two sections in metres. The result is a volume in cubic metres.
Is the result cut or fill?+
The calculator does not distinguish. It returns one earthwork volume for the two sections you enter, so run cut and fill sections separately.
How accurate is the estimate?+
It assumes the area changes in a straight line between the two sections. If the ground varies a lot between them, shorten the distance or split the run into several sections.
Does it account for swell or compaction?+
No. It returns the in-place geometric volume only. Swell, shrinkage and compaction are not applied, so adjust for them separately.