Culvert Pipe Capacity
Calculator

Inputs

Pipe area (m²)
0.159043

Results

Pipe area (m²)
0.159043
Flow velocity (m/s)
1.792634
Flow capacity (m³/s)
0.285106

Construction results

Pipe area (m²)0.159043
Flow velocity (m/s)1.792634
Flow capacity (m³/s)0.285106

formula-map diagram

Pipe area (m²)
0.159043
Flow velocity (m/s)
1.792634
Flow capacity (m³/s)
0.285106

Formula breakdown

Formula

Q = (1 ÷ n) × A × R^(2/3) × S^(1/2), R = D ÷ 4 for a full circular pipe

= 0.15904312808798

Note

Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.

Example: with the default inputs, calculator.construction.pipe_area_m2 is 0.1590431280879833.

More in Construction and trades

See all →

Frequently asked questions

How do I calculate culvert pipe capacity?+

Enter the pipe diameter in mm, Manning's roughness coefficient n and the pipe slope in percent. The calculator returns the pipe area, the flow velocity and the flow capacity in m³/s.

What formula does the culvert calculator use?+

Manning's equation for a circular pipe flowing full: Q = (1 ÷ n) × A × R^(2/3) × S^(1/2), with hydraulic radius R = D ÷ 4.

What value of Manning's n should I use?+

The default is 0.013, but the right value depends on the pipe material and condition. The calculator does not look it up for you, so enter the n appropriate for your pipe.

Does it account for inlet control, partial flow or debris?+

No. It assumes the pipe flows completely full under uniform flow, so it does not model inlet control, partial depth, headwater, tailwater or blockage. Real capacity can be lower.

Can I use this to design a culvert?+

Use it only as a rough estimate of full-pipe capacity. It is not a hydraulic design or professional advice; drainage design should be checked by a qualified engineer.