Column Concrete Volume
Calculator

Inputs

Column volume (m³)
0.376991

Results

Column volume (m³)
0.376991
Column volume with waste (m³)
0.39584

Construction results

Column volume (m³)0.376991
Column volume with waste (m³)0.39584

formula-map diagram

Column volume (m³)
0.376991
Column volume with waste (m³)
0.39584

Formula breakdown

Formula

V = π × r² × h, r = diameter ÷ 2, then V × (1 + waste ÷ 100)

= 0.37699111843078

Note

Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.

Example: with the default inputs, calculator.construction.column_volume_m3 is 0.3769911184307752.

More in Construction and trades

See all →

Frequently asked questions

How do I calculate the concrete needed for a round column?+

Treat the column as a cylinder: V = π × r² × h, with the radius equal to half the diameter. The calculator converts the diameter from millimetres and returns cubic metres.

What inputs does the column concrete calculator use?+

Column diameter (mm), column height (m) and a waste allowance in percent. The defaults are 400 mm, 3 m and 5 %.

Does it add a waste allowance?+

Yes. It gives the exact volume and a second figure multiplied by (1 + waste ÷ 100).

Can I use it for square or rectangular columns?+

No. The formula is for a circular cross-section only. For a rectangular column, multiply width by depth by height instead.

Is the result a structural or ordering specification?+

No. It is a geometric volume estimate from the dimensions you enter. Reinforcement, formwork and structural design are not covered, so rely on your engineer and supplier for those.