Business Card Bleed Safe Area
Calculator
Results
- Document width with bleed (mm)
- 95
- Document height with bleed (mm)
- 57
- Safe-area width (mm)
- 83
- Safe-area height (mm)
- 45
Design and print results
| Document width with bleed (mm) | 95 |
| Document height with bleed (mm) | 57 |
| Safe-area width (mm) | 83 |
| Safe-area height (mm) | 45 |
formula-map diagram
- Document width with bleed (mm)
- 95
- Document height with bleed (mm)
- 57
- Safe-area width (mm)
- 83
- Safe-area height (mm)
- 45
Formula breakdown
Formula
bleed size = trim + 2×bleed; safe area = trim − 2×safe margin= 95
Note
Simplified model: these are standard prepress and typographic relationships computed on nominal values. Real press bulk, paper caliper and shrinkage, ink limits for a given profile, font metrics and binding allowances vary by supplier and by job, so confirm with your printer and a proof before going to press.
Example: with the default inputs, calculator.design.bleed_document_width_mm is 95.
More in Design and printing
See all →Frequently asked questions
How do I calculate the bleed size of a business card?+
Add twice the bleed to each trim dimension: bleed width = trim width + 2 × bleed, and the same for height. With the defaults (89 × 51 mm trim, 3 mm bleed) the document is 95 × 57 mm.
What is the safe area on a business card?+
The safe area is the zone inside the trim where text and key elements should stay. This calculator subtracts twice the safe-area inset from each trim dimension: safe width = trim width − 2 × safe margin.
What is the difference between trim, bleed and safe area?+
Trim is the final cut size, bleed is extra artwork extending beyond the trim on every edge, and the safe area is an inset inside the trim. The calculator returns the bleed document size and the safe area size from your four inputs.
Is the bleed added on all four sides?+
Yes. The same bleed value is applied to every edge, which is why it is counted twice in each dimension. The calculator does not handle different bleeds per side.
Which values should I use for my printer?+
The defaults (89 × 51 mm trim, 3 mm bleed, 3 mm safe margin) are only starting values. Your printer's own template and specifications take precedence, so enter the figures they give you.