Boat Speed Length Ratio
Calculator
Results
- Speed-length ratio
- 1.8
Aviation and marine results
| Speed-length ratio | 1.8 |
formula-map diagram
- Speed-length ratio
- 1.8
Aviation and marine relationship
Formula
Speed-length ratio = speed (knots) ÷ √(waterline length in ft)= 1.8
Note
This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.
Example: with the default inputs, calculator.aviation.speed_length_ratio is 1.8.
More in Aviation and marine
See all →Frequently asked questions
What is the speed-length ratio of a boat?+
It is your boat speed in knots divided by the square root of the waterline length in feet. This calculator returns that single number from the two values you enter.
What inputs does the calculator need?+
Two values: boat speed in knots and waterline length in feet. The waterline length must be greater than zero, since the formula divides by its square root.
Why does the waterline length matter?+
The ratio compares speed with the square root of the waterline length, so the same speed gives a lower ratio on a longer boat. Entering overall length instead of waterline length will change the result.
Can I use metres or km/h?+
No, the formula as built expects knots and feet. Convert your speed to knots and your length to feet before entering them, otherwise the ratio will be wrong.
Does the ratio tell me my boat's maximum speed or fuel use?+
No. It only computes speed in knots divided by the square root of waterline length. It does not model hull shape, power, load or fuel consumption, so treat it as a simple comparison figure.