Boat Draft From Displacement
Calculator

Inputs

Estimated draft (ft)
1.388888

Results

Estimated draft (ft)
1.388888
Estimated draft (in)
16.666666
Displacement volume (ft³)
187.5

Aviation and marine results

Estimated draft (ft)1.388888
Estimated draft (in)16.666666
Displacement volume (ft³)187.5

formula-map diagram

Estimated draft (ft)
1.388888
Estimated draft (in)
16.666666
Displacement volume (ft³)
187.5

Aviation and marine relationship

Formula

Draft = displacement volume ÷ (LWL × beam × block coefficient)

= 1.3888888888889

Note

This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.

Example: with the default inputs, calculator.aviation.estimated_draft_ft is 1.3888888888888888.

More in Aviation and marine

See all →

Frequently asked questions

How is boat draft estimated from displacement?+

Draft = displacement volume ÷ (waterline length × beam × block coefficient). The volume is the displacement in pounds divided by 64 lb per cubic foot of seawater.

What inputs does the boat draft calculator need?+

Displacement in pounds, waterline length in feet, beam in feet and a block coefficient (Cb). The default Cb is 0.45.

What is the block coefficient here?+

It is the fraction of the box formed by waterline length, beam and draft that the hull actually fills. You enter it yourself; the calculator does not work it out from the hull shape.

What results does it give?+

The estimated draft in feet and in inches, plus the displacement volume in cubic feet.

Is the draft result exact?+

No. It is a rough estimate that assumes seawater at 64 lb per cubic foot and the Cb you supply, and it ignores keel or appendage depth. Do not use it as a substitute for a naval architect's figures.