Bandsaw Blade Length
Calculator

Inputs

Blade length (mm)
1,785.398163

Results

Blade length (mm)
1,785.398163
Blade length (m)
1.785398
Blade length (inches)
70.291266

Results

Blade length (mm)1,785.398163
Blade length (m)1.785398
Blade length (inches)70.291266

formula-map diagram

Blade length (mm)
1,785.398163
Blade length (m)
1.785398
Blade length (inches)
70.291266

Formula map

Formula

L = 2C + π(D1+D2)/2 + (D2−D1)² ÷ (4C)

= 1785.3981633974

Note

This result is a simplified model; verify against your shop's own tolerances and material data before cutting.

Example: with the default inputs, calculator.woodwork.blade_length_mm is 1785.3981633974481.

More in Woodworking and metalwork

See all →

Frequently asked questions

How is the bandsaw blade length calculated?+

The calculator uses L = 2C + π(D1 + D2)/2 + (D2 − D1)² ÷ (4C), where C is the centre-to-centre distance and D1 and D2 are the two wheel diameters. It returns the length in millimetres, metres and inches.

What measurements do I need to find my blade length?+

You need the diameter of each wheel and the distance between the wheel centres, all in millimetres. Enter the diameters as measured on the wheels and the centre distance at the position where the blade will run.

What if both wheels are the same size?+

Then D2 − D1 is zero and the last term drops out, leaving L = 2C + π × D. With the defaults (250 mm wheels, 500 mm centres) that gives about 1,785 mm.

Does the result change if I move the wheel centres?+

Yes. The centre distance appears in the formula, so a longer distance gives a longer blade. If your saw has an adjustable tracking range, run the calculation at the position you plan to use.

Is the result the exact blade size to buy?+

It is a geometric estimate of the length wrapped around the two wheels. Real blades are sold in set sizes and saws tolerate a small range, so compare the result with your saw's manual before ordering.