Anchor Bolt Spacing
Calculator

Inputs

Anchor bolt count
5

Results

Anchor bolt count
5

Construction results

Anchor bolt count5

formula-map diagram

Anchor bolt count
5

Formula breakdown

Formula

n = floor(sill length ÷ spacing) + 1

= 5

Note

Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.

Example: with the default inputs, calculator.construction.anchor_bolt_count is 5.

More in Construction and trades

See all →

Frequently asked questions

How many anchor bolts do I need for a sill plate?+

Enter the sill plate length in metres and the on-centre bolt spacing in millimetres. The calculator returns the number of anchor bolts.

What formula does the anchor bolt calculator use?+

n = floor(sill length ÷ spacing) + 1. The spacing is converted from mm to m, the division is rounded down, and one bolt is added for the starting end.

What spacing should I use?+

The default is 1800 mm, but the calculator does not set the spacing for you. Use the spacing required by your local code or your engineer.

Does it add bolts near the ends or at plate splices?+

No. It only counts bolts at even on-centre spacing along the length. Any extra bolts required near ends, corners or splices must be added separately.

Is the result a structural specification?+

No, it is a count estimate. It does not size bolts, embedment or washers, and it is not engineering advice; confirm requirements with local code or a qualified professional.