Amplifier Voltage Gain Db
Calculator

Inputs

Voltage gain (dB)
20

Results

Voltage gain (dB)
20
Voltage gain ratio
10

Electrical results

Voltage gain (dB)20
Voltage gain ratio10

formula-map diagram

Voltage gain (dB)
20
Voltage gain ratio
10

Electrical relationship

Formula

Av(dB) = 20 × log10(Vout / Vin)

= 20

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.voltage_gain_db is 20.

More in Electrical engineering

See all →

Frequently asked questions

How is amplifier voltage gain in decibels calculated?+

This calculator uses Av(dB) = 20 × log10(Vout / Vin). Enter the input and output voltages in volts.

Does it also give the gain as a plain ratio?+

Yes. Alongside the decibel value, it returns the voltage gain ratio Vout / Vin.

Why 20 and not 10 in the formula?+

The calculator uses 20 × log10 because it works on voltages. Its separate power gain calculator uses 10 × log10 on power values instead.

Can the gain be negative?+

Yes. If the output voltage is lower than the input voltage, the ratio is below 1 and the result in decibels is negative, which indicates attenuation.

Why must both voltages be above zero?+

The logarithm and the division need positive values. The calculator keeps both voltages at a tiny positive minimum to avoid invalid results.